Gigaset GS3 User Manual page 60

Security
Display lock
The display lock protects the device from unauthorised use. When you switch the device on or
enable the display, you are prompted to unlock the device.
The display lock becomes active after a defined time after the device has switched to idle mode.
A pattern, PIN or password is used as the display lock.
It is also possible to use a fingerprint as a display lock (
display lock set up serves as the alternative method.
Setting up a display lock
Settings
have already specified a lock
None . . . No security
Swipe . . . The display can be unlocked by swiping over the screen
For Pattern:
Draw the pattern - join together at least four dots
Confirm
For PIN:
Enter at least four letters or digits
For Password:
Enter at least four letters or digits
Settings for the display lock
Settings
Showing/hiding the pattern
Only for a display lock with pattern. When entering the pattern to unlock the device, the pattern
is shown as a line by default. You are able to change this for security reasons.
Enable/disable the switch next to Make pattern visible
Setting the time for automatic display lock
The display lock is enabled once the device has been in idle mode for a certain time.
Automatically lock
Enabling the display lock when switching on and off
Enable/disable the switch next to Power button instantly locks
The settings for Automatically lock and Power button instantly locks can be
cancelled with Smart Lock.
60
Security Screen lock
Select the method . . .
Continue
Continue
Security Tap next to Screen lock
Select the duration of idle mode
p. 31). In this case, the
Enter the PIN, pattern or password if you
Continue Repeat the pattern
Repeat the PIN
Repeat the password
Make the setting
Confirm
Confirm