Handling - AWG M2 Original Operating Manual

AWG I Operating manual I Fittings I
Use of different foam agents
Foam agents from different manufacturers and different
products or types must not be mixed. Applied extinguishing
foams are compatible without any problems.
5.2

Handling

1 Foam tube
2 Grip
3 Pressure gauge
Fig. 2 Handling
Required flow pressure
The foam nozzle is designed for a flow pressure of 3 to
5 bar on the inlet side. Within this range, optimum foaming is
achieved.

The water hose for connection to the fixed coupling of the foam
nozzle is ready at hand.

If the device is equipped with a stop valve with hand lever, the hand
lever must be closed (Fig. 2/B).
M1107B10 I Rev. 02-03/20
Medium expansion foam nozzles M2, M4, M8
4
5
6
ENGLISH
Hand lever stop valve (option)
Fixed coupling
Water hose adapter
USE
31 / 40