Table of Contents
Advertisement
Functional Safety HiC2871A
Product Description
2
Product Description
2.1
Function
This isolated barrier is used for intrinsic safety applications.
The device supplies power to solenoids, LEDs and audible alarms located in a
hazardous area.
The device is loop powered, so the available energy at the output is received from
the input signal. The output signal has a resistive characteristic. As a result the
output voltage and current are dependent on the load and the input voltage
At full load, 12 V at 45 mA is available for the hazardous area application.
This device mounts on a HiC Termination Board.
2.2
Interfaces
The device has the following interfaces.
• Safety relevant interfaces: input and output
Note!
For corresponding connections see datasheet.
2.3
Marking
Pepperl+Fuchs GmbH
Lilienthalstraße 200, 68307 Mannheim, Germany
Internet: www.pepperl-fuchs.com
HiC2871A
2.4
Standards and Directives for Functional Safety
Device specific standards and directives
Functional safety
System-specific standards and directives
Functional safety
IEC/EN 61508, part 1 – 7, edition 2010:
Functional safety of electrical/electronic/programmable
electronic safety-related systems (manufacturer)
IEC/EN 61511, part 1 – 3, edition 2003:
Functional safety – Safety instrumented systems for the
process industry sector (user)
Up to SIL 3
7
Advertisement
Table of Contents
