Replacing a WLAN Card
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel
resistance, check the connectors on the card and on the system board, and realign
the card.
NOTICE:
To avoid damage to the WLAN card, never place cables under the card.
1 Insert the
WLAN
"WLAN" at a 45-degree angle by aligning the notch on the WLAN card to
the slot on the system board connector.
2 Press down the other end of the WLAN card and tighten the screw
securing the card to the system board.
card connector into the system board connector labeled
Adding and Replacing Parts
147