Bank Of Collectors - SOLE S150 Installation Manual

4. Banks of Collectors
The solar collectors can be connected with each other to form banks of up to 6 units
in parallel, connecting the top and bottom of the collectors through the fittings
included in the set.
The dimensions of pipe connections for collector arrays up to 20m² is 22mm.
It is recommended that the connections between the different banks of collectors are
also conducted in parallel. However, the connection of up to two banks of solar
collectors in series is allowed.
In the following figures from 6 to 13 shows the dimensions of the solar collectors
from 1 to 6 units and for different angles of inclination. Additionally, there should be
sufficient space around the banks of collectors to perform with comfort the hydraulic
connections.
Figure 7. A Single Collector
TYPE A
S150 960mm
S200 960mm
S230 1165mm
S260 1238mm
B
890
890
890
890
Page 9 of 24