Table of Contents
Advertisement
1. Presentation
The present document demonstrates detailed installation instructions for the solar
collectors using the support frames and accessories included in the supply.
Before proceeding with the installation of the collectors, read these instructions and
make sure you have understood. If you have questions about the materials or on the
assembly process described in this document, contact your supplier via telephone,
fax or e-mail. Improper installation of the collectors may cause an unsatisfactory
operation of the solar system, compromising its durability and even be dangerous for
the people or the goods.
The instructions of this document do not exempt in any way the compliance with
existing regulations and provisions of technical and administrative application at the
place where the facility is located.
The installation of solar collectors without following the instructions in this document
and / or regulations will invalidate the warranty of the product.
The installer will check before starting the installation that he has all the necessary
parts and all the security measures have been taken in order to carry out the
installation safely. The installer must use protective gloves to avoid any risk of burns
or cuts during handling of collectors or its support frame.
2. Parts Included
The supply consists of:
One or more solar collectors
One or more support frames
Two or more fitting and connection (except for a single collector)
2.1. Solar Collectors
The solar collectors are supplied individually packaged in carton boxes. The collector
model is indicated on the outside of each box. Depending on the number of units
ordered, collectors can be supplied palletised in groups of up to 10 units. Collectors
should always be during transport and storage placed with the glass facing on top,
otherwise there is danger of water entering in the collectors from the ventilation holes
at the back of the collector.
The main technical characteristics of the collectors are indicated below (figure no. 1)
TYPE
WEIGHT
S150
27,30kg
S200
32,00kg
S230
38,80kg
S260
44,00kg
DIMENSIONS (mm)
A
B
C
960
1540
1010
960
1960
1010
1165
1960
1215
1238
2135
1308
D
E
F
895
1458
1815
895
1878
2183
895
1878
2280
895
2055
2468
Page 4 of 24
Advertisement
Table of Contents
