Table of Contents
Advertisement
The Ez Download utility, available from the TV Manager, enables you to select multiple files at one
time from the files loaded on a USB memory device. You may use this utility to download any one
or all of the following to a TV:
• One Clone or FTG Configuration (.tlx) file
• One TV CPU software update
• One PTC software update
• One boot logo image
Before You Begin
• Ensure the USB device has been formatted with FAT format.
• Software update and image files must be stored in a folder named "LG_DTV" in the root directory
of the USB memory device. Clone/Configuration (.tlx) files should simply be stored in the root
directory of the USB device.
• If you have initiated the EZ-Manager Wizard, you can use the wizard's "USB Configuration"
option to access the Ez Download utility, if desired (see "TV Configuration Options" and/or "USB
Configuration" on pages 21 and 29, respectively, as necessary).
• If the TV is currently in Pass-through Mode and you intend to use the Zoning feature on this TV
for location-specific configuration purposes, make sure to set the appropriate TV Zone # in the
TV when directed to do so in the procedure below.
• When creating files to be downloaded, avoid using special characters (?, &, @, etc.) in filenames.
• Refer to "Custom Master TV Setup" on pages 46 to 48 for information on creating a Clone (.tlx)
file, and/or refer to "Creating an FTG Configuration File" on pages 55 to 57 for information on
creating an FTG Configuration (.tlx) file for FTG Mode configuration.
• See Reference section, "Downloading a Boot Logo Image using a USB Memory Device," for
boot logo image guidelines.
• See Reference section, "Updating TV/PTC Software using a USB Memory Device," for further
information on software updates.
Caution: Do not unplug the TV power cord or remove the USB memory device
during a data download, as doing so may cause the TV to malfunction or harm the
USB device, respectively.
Accessing and Using the Ez Download Utility
1. If it is not ON already, turn ON the TV.
2. The next step depends on whether the First Use Wizard appears on the screen when you turn
ON the TV:
• If the wizard is displayed, you can access the Ez Download utility via the EZ-Manager Wizard,
as indicated above (see "Before You Begin"). However, to continue with this procedure and
access the Ez Download utility from the TV menus, exit the First Use Wizard. Then, continue
with step 3.
• If the wizard is not displayed, go directly to step 3.
206-4351
Ez Download Utility
(Continued on next page)
31
Advertisement
Table of Contents
