Advertisement
•
KT120/KT150 output valves
•
6SN7/CV181 (6N8) 1
•
Hand wired point to point components
•
Ceramic valve bases for minimum leakage
•
90w RMS* UL maximum one channel driven 8Ω
•
85w RMS* UL both channels 8Ω
•
50w RMS* Triode both channels 8Ω
•
65w RMS* per ch Ultralinear 8Ω KT88
•
36w RMS* per channel Triode mode 8Ω KT88
•
Feedback: 6db High sensitivity, 18db Low sens
•
Signal to noise level -90db
•
Damping Factor low gain: 20.5 8Ω Triode/UL
•
Damping Factor high gain: 5.5 8Ω Triode/UL
•
Freq response 20Hz (-0db)-20khz (0db) any power
•
Full power bandwidth 20Hz (-0 db)-35khz -3db
•
Total Harmonic Distortion UL 8 ohms:
•
1 Watt 0.06%
•
8 Watts 0.2%
•
72 Watts 0.5%
•
4 and 8 ohms output taps
•
Japanese grain oriented transformer iron
•
Icon Audio Low Distortion output transformers
•
Choke regulated power supply
•
Supplied with attractive valve cover
•
3 potted transformers to reduce transformer noise
•
High quality metal film & wire wound resistors
•
High quality polypropylene audio caps
•
Optional Mundorf Silver/Gold audio caps
•
Japanese 'Blue' ALPS volume pot.
•
Rubicon/Nichichron power capacitors.
•
Silver plated copper PTFE audio wire
•
Valves carefully matched for best performance
•
Gold plated Input & speaker terminals
•
Inputs for CD, Tape, Tuner, Aux
•
Tape monitor output
•
295mv sensitivity for full output (High sensitivity)
•
1030mv sensitivity for full output (Low sensitivity)
•
117/240 Volts, 200 Watts (400W max full power)
•
Standby 80 Watts
•
3.15 amp (5A 115/120v) rear fuse (with spare)
•
500ma Internal HT fuses (spares inside)
•
Overall size:440W, 400D, 230H, 35kg (Allow space for connections and ventilation)
•
IEC mains lead, (plug 5amp fused UK)
•
CE, ROHS, WEEE compliant
Typical valves and conditions 240V 50 Hz
* Refers to measured RMS voltage across 8 Ohms. 240v/117v at clipping point, KT88 use requires a lower HT tap.
(Specifications subject to change, errors & omissions excepted 19/02/20)
Every effort is made for the accuracy of this information.
But inevitably errors can happen. Please let us know if
you spot an error.
10 Specification & Features
st
nd
and 2
stage
Page 8
Advertisement
