Advertisement
Specifications and Features
• All hand wired point to point
• No printed circuit board to 'colour' sound
• Japanese Blue ALPS volume pot.
• Bluetooth receiver (option)
• Class A, all Triode circuit
• Output impedance matching from 16 to 600Ω
• 2 x 205D output valves
• 2x ECC88/6922/6DJ8 first stage valve
• 1x GZ34/5AR4/274B
• 2x 800mw output per channel max (depending upon load)
• Signal to noise level -80db
• Freq response 20hz-20kHz
• Total harmonic distortion typically less than 0.2% 1khz
• Custom hand wound output transformers
• EI transformers with low oxygen copper
• High quality 2W metal film, & wire-wound resistors
• LED mains indicator
• Polypropylene audio capacitors or Mundorf upgrade option.
• Silver PTFE audio cable
• Gold plated Input terminals
• One line input with "loop out" facility
• 300mv input sensitivity for full output
• 235/117volts 50 watts.1.0 A (2A USA) anti-surge fuse.
• C E, ROHS and WEEE compliant where applicable.
• Dimensions:-
• Amplifier section 22cm W x 32 cm D x 17 H, 7.5 kg (allow
space for connections)
• Power supply – 13cm W x 31cm D x 19cm H, 8.5kg (allow
space for power lead to amp at rear and ventilation for
valves)
• Boxed unit – 45cm D x 40cm W x 32cm H, 20 kgs
(Specifications subject to change, errors & omissions excepted. General 19/02/20)
icon Audio
351 Aylestone Road
Leicester LE2 8TA
www.iconaudio.com
Ph +44 (0) 116 244 0593 +44 (0) 7787 158791
(UK) Ltd
Page 5
Advertisement
