Dell Dimension 8200 Solution Manual page 66

66 Ad d i n g Par ts
Use the two view slots to align the pivot bar with the two pivot-bar
6
slots.
view slots (2)
hinge arms in
horizontal
position
NOTICE: Using excessive force to pull the hinge arms into place may damage
the arms or the front panel.
Pull the arms toward you until they snap into place.
7
If the hinge arms don't snap back into place on the first attempt,
slightly reposition the arms and try again.
After the hinge arms clip into place, lower and raise the arms two or
8
three times to properly seat them.
Reattach the front-panel insert.
9
pivot-bar slots (2)
pivot bar