RaycoWylie i4500 Instruction Manual page 45

4.4.4 Working with the Main Boom or Jib (Cont'd)
According to your choice
at step # 6, the system will
either start by the main
hoist or by the auxiliary
hoist.
or
o r
or
i4500 Lattice Boom Crane
9. You now have to select the hoist used on the jib
(usually H2) from the list. Use the Up or Down
button to select the good value among the choices
on the list.
10. Press Select button to accept the new value in
the system or press the Escape button to go back
to the previous screen.
11.Now enter the number of parts of line used
between the block of the jib and the head sheave.
Use the Up or Down button to enter the first digit.
12. Press the Select button to highlight the
second digit.
45
55M4500EBE00A-A
Instruction Manual