2 Remove two extra alignment screws, shown in the illustration on page 72, from the front of the
computer and insert them into the drive.
NOTE:
Some computers come with only two extra alignment screws; others come with four. You only need two
alignment screws for this procedure.
3 Gently slide the drive into place in the drive bay.
securing
screw
4 After the drive is in place, apply pressure to ensure that the drive is fully seated.
5 Use the securing screw that came with the drive to attach the drive to the computer.
72
Removing and Installing Parts
drive
alignment screws (2)
extra alignment
screws (2 or 4)
alignment screws (2)
drive