Advertisement
Stage 1: T Frame Assembly
For this stage you will require:
(1) Channel
(2) M10 x 65 mm Hex Head Bolts
(2) M10 Lock Nuts
FIGURE 1
Lay down the channel so the flat
surface is facing down and then
rotate the axle until the holes line up,
making the top of the axle level with
the flat part of the channel.
L-BRACKETS:
EXPLORER TRF
(1) Axle
(2) M10 Washers
FIGURE 2
Insert 2 M10 x 65 mm hex head bolts
and put one M10 washer and one
M10 lock nut on each bolt.
Tighten nuts and bolts.
FIGURE 3
EXPLORER TRF
Your
assembly
should
now
look
like
this.
FIGURE 4
Advertisement
