Summary of Contents for Equinox Systems nomad
- Page 3 Stage 1: Frame Assembly For this stage you will require: Quantity Description (Part #) Quantity Description (Part #) Quantity Description (Part #) Frame Frame gussets Front body supports ⁵⁄₁₆” x 1¾” Hex head bolts ⁵⁄₁₆” Washers ⁵⁄₁₆” Nylon lock nuts ¼”...
- Page 4 Lay out initial parts as shown in fig 1. For your frame to be in the correct position, place the frame with the flat plate for the hitch channel on the bottom. Attach front body supports to each side of the frame using ¼”...
- Page 5 Using the slotted side of the gusset, attach the 4 gussets onto the frame using the ⁵⁄₁₆” x 1¾” hex head bolts with washers and nylon locknuts. Ensure the locknuts are mounted on the gusset side (see fig 3 and 4). Do not tighten. Attach the axle assembly (see fig 5) to the frame gussets using ⁵⁄₁₆”...
- Page 6 Stage 2: Hitch Assembly For this stage you will require: Quantity Description (Part #) Quantity Description (Part #) Quantity Description (Part #)
- Page 7 Tipper Latch Ball Coupler Hitch Bar ½” x 2” Hex Head Bolts ½” Washers ½” Nylon Locknuts ³⁄₈” x 2” Hex Head Bolts ³⁄₈” Washers ³⁄₈” Nylon Locknuts ⁵⁄₁₆” x 3” Hex Head Bolt ⁵⁄₁₆” Washers ⁵⁄₁₆” Nylon Locknuts Frame Assembly ( from Stage 1...
- Page 8 Stage 3: Attaching the Body For this stage you will require: Quantity Description (Part #) Quantity Description (Part #) Quantity Description (Part #) ⁵⁄₁₆” x 1¾” Carriage Bolts ⁵⁄₁₆” Washers ⁵⁄₁₆” Nylon Locknuts Trailer Body Tub Frame Assembly ( from Stage 2 ⁵...
- Page 9 Stage 4: Attaching Wheels FIGURE 13 (see fig 12). Finally, grease wheel bearings with a grease gun. Warranty Information Equinox recreational division is committed to producing high quality components and stands behind all our products. Equinox guarantees that all products will leave our building free from manufacturer’s defects for the time period listed on our product warranty.