Check The Engine; Check The Gfci; Ac Appliance And Power Cord - Honda EM5000SX Owner's Manual

Before beginning your pre-operation checks, be sure the generator is on a level
surface and the engine switch is in the OFF position.
Generators with standard equipment transport wheels must not be operated with
the wheels and/or stands removed or else the generator may not operate correctly
and can become damaged.

Check the Engine

• Before each use, look around and underneath the engine for signs of oil or
gasoline leaks.
• Check the engine oil level (see page 40). A low engine oil level will cause the
Oil Alert system to shut down the engine.
• Check the air filters (see page 41). Dirty air filters will restrict air flow to the fuel
system, reducing engine and generator performance.
• Check the fuel level (see page 19). Starting with a full tank will help to
eliminate or reduce operating interruptions for refueling.

Check the GFCI

Check the GFCI operation (see page 50) after starting the engine.

AC Appliance and Power Cord

Before connecting an AC appliance or power cord to the generator:
• Use grounded 3-prong extension cords, tools, and appliances, or double-
insulated tools and appliances.
• Inspect cords and plugs, and replace if damaged.
• Do not use cord lengths greater than 164 feet (50 meters), and do not use
multiple tools and appliances with built-in noise filters. Such use may activate
the GFCI and interrupt power supply.
• Make sure that the appliance is in good working order. Faulty appliances or
power cords can create a potential for electric shock.
• Make sure the electrical rating of the tool or appliance does not exceed the
rated power of the generator or the receptacle being used.
• Do not exceed the current limit specified for any one receptacle.
BEFORE OPERATION
39