Switch And Module Weights And Quantities; Transceiver And Cable Specifications; Switch Power Input Requirements; Power Specifications - Cisco Nexus 93108TC-FX3P Hardware Installation Manual

Switch and Module Weights and Quantities

Switch and Module Weights and Quantities

Component
Cisco Nexus 93108TC-FX3P Chassis (N9K-C93108TC-FX3P)
Fan Module
– Port-side exhaust (blue) (NXA-FAN-35CFM-PE)
– Port-side intake (burgundy) (NXA-FAN-35CFM-PI)
Power Supplies
– 1100-W AC port-side exhaust (blue) (NXA-PAC-1100W-PE)
– 1100-W AC port-side intake (burgundy) (NXA-PAC-1100W-PI)
– 1900-W AC port-side intake (burgundy) (NXA-PAC-1900W-PI)

Transceiver and Cable Specifications

To determine which transceivers, adapters, and cables are supported by this switch, see
c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html.
To see the transceiver specifications and installation information, see
interfaces-modules/transceiver-modules/products-device-support-tables-list.html.

Switch Power Input Requirements

The following table lists the typical amount of power that the switch consumes. It also lists the maximum
amount of power that you must provision for the switch and power supply for peak conditions.
Note Some power supplies have capabilities that are greater than the maximum power requirements for a switch.
To determine the power consumption characteristics for the switch, use the typical and maximum requirements
that are listed in the following table.
Switch
Cisco Nexus
93108TC-FX3P

Power Specifications

Power specifications include the specifications for each type of power supply module.
Cisco Nexus 93108TC-FX3P NX-OS Mode Switch Hardware Installation Guide
38
Typical Power Maximum Power
Consumption (AC or DC) Consumption (AC or DC)
500 W 600 W
System Specifications
Weight per Unit Quantity
23 lb (10.43 kg) 1
— 4
0.26 lb (0.12 kg)
— 2 (1 for
operations
3 lb (1.36 kg)
and 1 for
3 lb (1.36 kg) redundancy)
3.6 lb (1.63 kg)
https://www.cisco.com/
https://www.cisco.com/c/en/us/support/
Heat Dissipation
Requirement
2047.285 BTUs per hour