Husqvarna 331R Workshop Manual page 26

5. Disconnect the throttle wire from the carburetor.
6. Disconnect the cables.
26 - Repair instructions
7. Remove the 3 screws (A) and remove the muffler
cover (B).
C
B
A
A
8. Remove the 4 screws ( C and D), and remove the
cylinder cover.
9. Remove the 4 screws (F) and remove the clutch
drum housing (G).
Note: This is only necessary if you also disassemble
the clutch drum. If not, the clutch drum housing can
stay on the flywheel cover.
10. Loosen the air filter cover for easier access to the
flywheel cover screws.
11. Remove the 5 screws and remove the flywheel
cover.
E
D
F
G
1296 - 001 - 27.09.2019