Table of Contents
Advertisement
7.7.4 To disassemble the carburetor
1. Turn the engine to get access to the air filter
assembly. Remove the air filter assembly (A, B, C
and D).
D
C
B
A
2. Close the choke valve and blow dirt off the
carburetor.
3. Remove the throttle wire from the carburetor (E).
E
L
K
J
F
G
20 - Repair instructions
N
M
I
H
4. Remove the 2 screws (F) and remove the air filter
housing (G), if it is necessary.
5. Remove the fuel hoses (H and I) from the carburetor
and remove the carburetor (J) and gasket (K).
6. Remove the 2 screws (L) the distance piece (M) and
gasket (N), if it is necessary.
7. Remove the 2 screws (O) and lift off the throttle
mechanism. Loosen the valve stop screw (P). Make
sure that the seal ring on the connection flange is
not damaged.
O
P
8. Remove the 4 screws (Q). Remove the bellows of
the fuel pump (R), the valve housing (S) and the
control diaphragm.
R
Q
Q
S
O
Q
Q
1296 - 001 - 27.09.2019
Advertisement
Table of Contents
