Start To Use; 1 Battery; Remove/Insert The Battery; Charge The Battery - RCA RLTP5048 User Manual

II. Start to Use
1 Battery
The battery which is initially 50% charged can be used immediately. Please fully
charge/discharge the battery for the first three times to get maximum capacity.

1.1 Remove/Insert the Battery

Installing the battery
■
1. Take out the back cover of the smart phone;
2. Insert the battery to the correct battery pin and push it down to fix.
3. Cover the back cover.
■ Remove the battery
Remove the battery according to the remove guide or sticker.
Note:
(1) Remove the battery before shutdown.
(2) Be sure to operate in accordance with the above method steps.

1.2 Charge the Battery

During charging, the battery indicator on the Smart Phone is a thunder icon. If the device is
switched off during the charge, there will still be a charge indication on the screen that shows the
phone is still being charged. If the device is overused when the battery is low, it might take some
time to appear the charging icon.
When the battery indicator on the screen says 'fully charged', then thunder icon will disappear,
which means the completion of charging. If the tablet PC is switched off during charging, the screen
will have a 'fully charged' scene. It generally takes 4 hours to charge the battery. During charging, the
battery, the device and the charger will get hot. This is normal.
Attention: Charge the smart phone in a well ventilated place in which the temperature is from‐10
o
to +55 C. Use the charger provided by the manufacturer only. The use of unconfirmed charger may
lead to dangers and violate the manufacturer's warranty clause. If the temperature is too high or too
low during the charge, the device will automatically send a warning and stop charging to avoid
damage to the battery or any danger.
2 Connecting to Network

2.1 Insert/Remove the Memory Card.


Switch off the smart phone.

Insert the memory card into the slot

Attention: This tablet PC doesn't support the hot‐swap of T card. When you need to take out
the inserted card, please switch off the device before taking out the memory card.

2.2 Switch ON/OFF

Do a long press the Switch on/off key to switch on/off the smart phone.

2.3 Connection to Network

When turn on the WIFI, the tablet will automatically search for available network. It will show
5
o
C