Page 1
INDOOR / OUTDOOR INSTALLATION VIDEO Retractable Gate Instruction Manual #2725 #755 #2741 #2739 33’’ (84cm) Tall Up to 71’’ | (1.8m) IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE. This product complies with safety standard ASTM F1004 - 10.
TABLE OF CONTENTS SAFETY INFORMATION General Maintenance Warnings Mountings WHAT’S IN THE BOX Parts INSTALLATION Gate Placement Inside Opening or Doorway Outside Opening or Doorway With Skirting or Baseboard To Remove OPERATION How to Open Cleaning Instructions SUPPORT Warranty Certificate Warranty Card After Sales Support...
SAFETY INFORMATION GENERAL Read this instruction manual carefully and keep it in a safe place for future reference. The correct use and maintenance of this product is essential. MAINTENANCE Regularly check that the gate is functioning correctly, lubricate hinges and moving components with a suitable spray lubricant. Tighten and adjust mounts to ensure secure smooth operation.
WARNINGS To prevent serious injury or death, securely WARNING install gate or enclosure and use according to manufacturer’s instructions. Incorrect installation can be dangerous. WARNING Danger to older children if climbing over the WARNING product. Do not use the safety barrier if any components WARNING are damaged or missing.
Page 5
WARNINGS Always check that the safety barrier is correctly WARNING closed. Use only with the locking/latching mechanism WARNING securely engaged. Gate must be installed as close to the ground as WARNING possible, as per the installation guides. Never use with a child able to climb over or WARNING dislodge/open the gate or enclosure.
SAFETY INFORMATION MOUNTINGS Gate must be installed in a structurally sound opening. Ensure mounting surface (wall, door frame, stair posts, etc.) is strong, rigid and has an even surface. Note: If using gate on stairs, it must be placed either on the top step or on the lowest step at the bottom.
Page 7
HARD WALL MOUNTING BRICK Drill 5mm (3/16’’) pilot holes, insert anchor and secure with screws. INSTALLATION Wood Screws Anchor HARD WALL MOUNTING CONCRETE Drill 3/16’’ (5mm) pilot holes, insert anchor and secure with screws. TOOLS REQUIRED PHILLIPS HEAD PENCIL SCREW DRIVER DRILL This gate must only be fixed to a solid and secure surface.
STEP 2: INSIDE OPENING OR DOORWAY Use the Gate Mount Installation Guide for the side you want the gate to retract from. Hold it vertically and completely outstretched against mounting surface with the end marked “FLOOR” even with the floor. Mark screw hole positions. Remove the template.
Page 12
INSTALLATION Repeat Step 1 for the other side with the Catch Mount Installation Guide.
Page 13
Align the Upper & Lower Align the Catch Mounts in Gate Mount on the side you its correct position on the want the gate to retract from. side you want the gate to Use a Phillips screwdriver retract to, use a Phillips to tighten Screws until each screwdriver to tighten Screws until each Mount...
Page 14
Attach Gate Assembly to the Gate Mounts by aligning the gate directly above and sliding straight down over Mounts. Check that the Gate Assembly is flush against the wall and is locked firmly in place. NOTE: Lower Gate Mount has a locking groove.
INSTALLATION STEP 3: OUTSIDE OPENING OR DOORWAY Follow step 1 & 2 from “Installation Inside Doorway or Opening” on page 11 & 12. Align each mount in its correct position, use a Phillips screwdriver to tighten Screws until each mount is secure. NOTE: These holes must be used to mount outside an opening or doorway.
INSTALLATION STEP 4: WITH SKIRTING OR BASEBOARD To help correct for the offset of a skirting board or baseboard, Spacers will be required. Measure the width of your skirting/ baseboard and use the closest number of Spacers to fit this width. Each Spacer is 3/16”...
OPERATION HOW TO OPEN ONE-HANDED OPERATION VIDEO To unlock the mechanism, simply push down and turn the button clockwise. There is no need to continue to hold the button to release the gate, pull handle in one fluid movement as stopping will engage lock.
SUPPORT WARRANTY CERTIFICATE Congratulations! You have made an excellent choice of this quality product. Our commitment to quality also includes our service. Should you, contrary to expectations, experience defects due to manufacturing faults, we will provide you with a warranty against defects as follows: Warranty The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase.
WARRANTY CARD Details: Indoor/Outdoor Retractable Gate Product Name: White 755 / Grey 2741 / Black 2725 2739 Product Number: (Please circle) Your Name: Address: Phone: Email: Date of Purchase: Location of Purchase: We recommend that you keep a copy of your receipt, showing the date of purchase, with this warranty certificate and keep for your reference.