Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Perma 754
Summary of Contents for Perma 754
- Page 1 INDOOR / OUTDOOR Retractable INSTALLATION VIDEO Gate Instruction Manual #754 84cm (33’’) Up to 1.4m | (55’’) IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE. This product complies with safety standard EN 1930:2011.
-
Page 2: Table Of Contents
TABLE OF CONTENTS SAFETY INFORMATION General Maintenance Warnings Mountings WHAT’S IN THE BOX Parts INSTALLATION Gate Placement Inside Opening or Doorway Outside Opening or Doorway With Skirting or Baseboard To Remove OPERATION How to Open Cleaning Instructions SUPPORT Warranty Certificate Warranty Card After Sales Support... -
Page 3: Safety Information
SAFETY INFORMATION GENERAL Read this instruction manual carefully and keep it in a safe place for future reference. The correct use and maintenance of this product is essential. MAINTENANCE Regularly check that the gate is functioning correctly, lubricate hinges and moving components with a suitable spray lubricant. Tighten and adjust mounts to ensure secure smooth operation. -
Page 4: Warnings
WARNINGS WARNING To prevent serious injury or death, securely install gate or enclosure and use according to manufacturer’s instructions. Incorrect installation can be dangerous. WARNING WARNING Danger to older children if climbing over the product. Do not use the safety barrier if any components WARNING are damaged or missing. - Page 5 WARNINGS Always check that the safety barrier is correctly WARNING closed. WARNING Use only with the locking/latching mechanism securely engaged. Gate must be installed as close to the ground as WARNING possible, as per the installation guides. WARNING Never use with a child able to climb over or dislodge/open the gate or enclosure.
-
Page 6: Mountings
SAFETY INFORMATION MOUNTINGS Gate must be installed in a structurally sound opening. Ensure mounting surface (wall, door frame, stair posts, etc.) is strong, rigid and has an even surface. Note: If using gate on stairs, it must be placed either on the top step or on the lowest step at the bottom. - Page 7 HARD WALL MOUNTING BRICK Drill 5mm (3/16’’) pilot holes, insert anchor and secure with screws. INSTALLATION Wood Screws Anchor HARD WALL MOUNTING CONCRETE Drill 5mm (3/16’’) pilot holes, insert anchor and secure with screws. TOOLS REQUIRED PHILLIPS HEAD PENCIL SCREW DRIVER DRILL This gate must only be fixed to a solid and secure surface.
-
Page 8: What's In The Box
WHAT’S IN THE BOX PARTS Gate Assembly Gate Mount Installation Guide Catch Mount Installation Guide... - Page 9 Upper Gate Mount Lower Gate Mount Wall Spacers Catch Mounts 35mm (1 3/8”) Upper Mount Screws 25mm (1”) Lower Wall Plugs (use with spacers) Mount Screws...
-
Page 10: Installation
INSTALLATION STEP 1: GATE PLACEMENT SUITABLE PLACEMENT OF GATE AND CATCH MOUNT Inside Opening or Doorway Outside Opening or Doorway... -
Page 11: Inside Opening Or Doorway
STEP 2: INSIDE OPENING OR DOORWAY Use the Gate Mount Installation Guide for the side you want the gate to retract from. Hold it vertically and completely outstretched against mounting surface with the end marked “FLOOR” even with the floor. Mark screw hole positions. Remove the template. - Page 12 INSTALLATION Repeat Step 1 for the other side with the Catch Mount Installation Guide.
- Page 13 Align the Upper & Lower Align the Catch Mounts in Gate Mount on the side you its correct position on the want the gate to retract from. side you want the gate to Use a Phillips screwdriver retract to, use a Phillips to tighten Screws until each screwdriver to tighten mount is secure.
- Page 14 Attach Gate Assembly to the Gate Mounts by aligning the gate directly above and sliding straight down over Mounts. Check that the Gate Assembly is flush against the wall and is locked firmly in place. NOTE: Lower Gate Mount has a locking groove.
-
Page 15: Outside Opening Or Doorway
INSTALLATION STEP 3: OUTSIDE OPENING OR DOORWAY Follow step 1 & 2 from “Installation Inside Doorway or Opening” on page 11 & 12. Align each Mount in its correct position, use a Phillips screwdriver to tighten Screws until each mount is secure. NOTE: These holes must be used to mount outside an opening or doorway. -
Page 16: With Skirting Or Baseboard
INSTALLATION STEP 4: WITH SKIRTING OR BASEBOARD To help correct for the offset of a skirting board or baseboard, Spacers will be required. Measure the width of your skirting/ baseboard and use the closest number of Spacers to fit this width. Each Spacer is 5mm (3/16’’) thick. -
Page 17: To Remove
STEP 5: TO REMOVE To remove gate from the Mounts, push and hold the release button while sliding the gate upwards. -
Page 18: Operation
OPERATION HOW TO OPEN ONE-HANDED OPERATION VIDEO To unlock the mechanism, simply push down and turn the button clockwise. There is no need to continue to hold the button to release the gate, pull handle in one fluid movement as stopping will engage lock. -
Page 19: Cleaning Instructions
CLEANING INSTRUCTIONS Simply use a soft damp cloth to wipe gate, dry after cleaning. Do not use chemical or abrasive cleaners. -
Page 20: Support
SUPPORT WARRANTY CERTIFICATE Congratulations! You have made an excellent choice of this quality product. Our commitment to quality also includes our service. Should you, contrary to expectations, experience defects due to manufacturing faults, we will provide you with a warranty against defects as follows: Warranty The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. -
Page 21: Warranty Card
WARRANTY CARD Details: Product Name: Retractable Gate Product Number: White 754 Your Name: Address: Phone: Email: Date of Purchase: Location of Purchase: We recommend that you keep a copy of your receipt, showing the date of purchase, with this warranty certificate and keep for your reference. In the event of a product fault, please contact after sales support.