Table of Contents
Advertisement
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock
The hob should be turned off.
To activate: press the symbol
The indicator next to the symbol
The hob is locked.
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
All the hotplates have this function.
To activate
The hob must be switched on, but no hotplate should be
working.
Select a hotplate.
1.
Press the
›
symbol.
2.
The indicator
lights up
›
The function has been turned on.
Note: If any hotplate is switched on when the Powerboost
function is working,
›
and
Time program function
This function may be used in two different ways:
to automatically switch off a hotplate
■
as a timer
■
Turning off a hotplate automatically
The hotplate turns off automatically once the selected time has
elapsed.
Programming the cooking time.
The hob must be switched on:
Select the required hotplate and power level.
1.
Press the
0
symbol. The
2.
up.
‹‹
is displayed on the time program function display.
Press the + or - symbol. The basic setting appears:
3.
+ symbol: 30 minutes.
- symbol: 10 minutes.
for approximately 4 seconds.
‚
lights up for 10 seconds.
‚
Š
.
Š
will flash on the hotplate display;
Ú
indicator on the hotplate lights
To deactivate: press the symbol
4 seconds. The lock is now deactivated.
Childproof lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
All of the relevant information on the automatic childproof lock
connection can be found in the Basic settings chapter.
the power level
Š
will then be set. The Powerboost function will
be deactivated.
To deactivate
Select a hotplate.
1.
Press the
symbol.
›
2.
The
indicator will no longer appear and the hotplate will
›
return to the power level
The function will be deactivated.
Note: In certain circumstances, the PowerBoost function can
switch itself off automatically in order to protect the electronic
elements inside the hob.
Press the + or - symbol until the required cooking time
4.
appears.
After a few seconds, the cooking time begins to count down.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Changing or cancelling the time
Select the hotplate . Press the
cooking time with the + or - symbols, or set to
Once the time has elapsed
The hotplate switches off. A beep sounds and in the time
program function display
‹‹
The
indicator on the hotplate lights up. Pressing the
Ú
symbol turns off the indicators and stops the beeping.
Notes
If cooking times have been programmed for various
■
hotplates, the time programming function always displays the
time for the selected hotplate.
Any cooking time can be programmed for up to 99 minutes.
■
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
‚
for approximately
.
Š
symbol and change the
0
.
‹‹
appears for 10 seconds.
0
15
Advertisement
Table of Contents
