Download Print this page

MRdirect Waterfall Faucet Installation Manual

Certifications & Information

• ADA Approved

• Limited Lifetime Warranty

Gather the necessary tools as shown to complete the installation of this faucet.

Safety Glasses

1-hole Installation

Sir

Faucet

* This measurement is only suggestive and may vary

according to the sink model.

Installation Guide

Teflon Tape (Included)

Adjustable Wrench

Installation Guide

Waterfall Faucet

Phillips Screwdriver

Connect to water supply lines with TWO

3/8" Compression Faucet Connectors

(Included)

Flow Rate

1.58gpm at 60PSI

Flashlight

Water supply

Connector

Table of Contents

Need help?

Do you have a question about the Waterfall Faucet and is the answer not in the manual?

Page 1 Installation Guide Waterfall Faucet Certifications & Information • ADA Approved • Limited Lifetime Warranty Flow Rate 1.58gpm at 60PSI Tools Gather the necessary tools as shown to complete the installation of this faucet. Teflon Tape (Included) Safety Glasses Adjustable Wrench...
Page 2 Installation Guide Faucet Installation A. Turn off the water supply. Remove the faucet with the mounting hardware attached from the package. B. Remove all mounting hardware from the coup. coup C. Insert the coup of the faucet body into the hole of the sink deck. D.
Page 3 Installation Guide Important Turn on the water supply SLOWLY, to test for leaks before completely opening the water lines. To prevent damage to the tube body, tighten the connections by carefully using two wrenches as shown. Use caution to not bend the stem. Check for leaks.
Page 4 www.mrdirectint.com sales@mrdirectint.com 1-877-946-5725 Notes Warranty Information MR Direct warrants to the original consumer purchaser that our sinks and faucets will be free from defects in material and workmanship under normal use for the lifetime of the product. MR Direct may elect to repair or replace any defective MR Direct product covered by our warranty.