Page 1
Installation Guide Model 720 Single-Handle Lavatory Faucet Certifications & Information Flow Rate Chart • NSF Certified • Lead Free Construction • cUPC & UPC • WaterSense Certified • ADA Approved • Limited Lifetime Warranty Tools Gather the necessary tools as shown to complete the installation of this faucet.
Page 2
Installation Guide Faucet Installation A. Turn off the water supply. Remove the faucet with the mounting hardware attatched from the package. B. Remove all mounting hardware from the shank. shank washer lock nut mounting screws C. Insert the shank of the faucet body into the hole of the sink deck.
Page 3
Installation Guide Important Turn on the water supply SLOWLY, to test for leaks before completely opening the water lines. Remove the aerator from the end of the faucet by carefully unscrewing it. Let hot and cold water run through both water lines for at least one minute before replacing the aerator.
Page 4
www.mrdirectint.com sales@mrdirectint.com 1-877-946-5725 Notes Warranty Information MR Direct warrants to the original consumer purchaser that our sinks and faucets will be free from defects in material and workmanship under normal use for the lifetime of the product. MR Direct may elect to repair or replace any defective MR Direct product covered by our warranty.
Need help?
Do you have a question about the 720 and is the answer not in the manual?
Questions and answers