Advertisement
Quick Links
D-2100 Series
with MOD 4.0 AC
Congratulations on the purchase of your new Magnaflux
D-2100 Magnetic Particle Inspection Machine! This guide will
help you install and set-up your new Magnaflux machine.
If you have any questions, please contact your local
Magnaflux Authorized Service Center or call Magnaflux
Customer Service at 847-657-5300.
Page 1
Magnaflux-SRVC-IG008
D-2100 Series with MOD 4.0 AC
© 2015 Magnaflux
Issued: Apr 2015
Rev. 2
Advertisement
Related Manuals for Magnaflux D-2100 Series
Summary of Contents for Magnaflux D-2100 Series
- Page 1 Congratulations on the purchase of your new Magnaflux D-2100 Magnetic Particle Inspection Machine! This guide will help you install and set-up your new Magnaflux machine. If you have any questions, please contact your local Magnaflux Authorized Service Center or call Magnaflux Customer Service at 847-657-5300.
-
Page 2: Getting Started
See page 3 for correct fuse sizes. continued on Page 3... Page 2 Magnaflux-SRVC-IG008 D-2100 Series with MOD 4.0 AC © 2015 Magnaflux Issued: Apr 2015 Rev. 2... - Page 3 ONCE. This will cause particles to accumulate in the D-2100XL2 (5 door) bottom of the tank. Allow particles to mix for 20–30 minutes, then test concentration per instructions. Page 3 Magnaflux-SRVC-IG008 D-2100 Series with MOD 4.0 AC © 2015 Magnaflux Issued: Apr 2015 Rev. 2...
- Page 4 Replacement is recommended every 3 months, based on using Magnaflux materials for an 8 hour day, 5 days a week work schedule. It is recommended to maintain a back-up pump that can be switched out when the seal needs to be changed in order to decrease the amount of downtime on the machine.
- Page 5 132.5″ 41″ 60.25″ (D-2100L) (336 cm) (104 cm) (153 cm) Extra long unit 176.5″ 41″ 60.25″ (D-2100XL) (448 cm) (104 cm) (305 cm) Page 5 Magnaflux-SRVC-IG008 D-2100 Series with MOD 4.0 AC © 2015 Magnaflux Issued: Apr 2015 Rev. 2...