Technical Data; Ec Declaration Of Conformity - Stanley FATMAX FMC625 H1 Original Instructions Manual

ENGLISH
You can check the location of your nearest authorised repair
agent by contacting your local Stanley Europe ofice at the
address indicated in this manual. Alternatively, a list of
authorised Stanley Europe repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Z
Stanley Fat Max batteries can be recharged many
times. At the end of their useful life, discard batteries
with due care for our environment:
Run the battery down completely, then remove it from the
u
tool.
NiCd, NiMH and Li-Ion batteries are recyclable. Take them
u
to any authorised repair agent or a local recycling station.

Technical data

Voltage V
DC
No-load speed Min
Max. torque
Nm
Chuck capacity mm
Max Drilling capacity
Steel/wood/
mm
masonry
Charger
Input Voltage
Output Voltage
Current
Approx. charge time
Battery
FMC685L
Voltage V 18
DC
Capacity Ah 1.5
Type Li-Ion
Level of sound pressure according to EN 60745:
Sound pressure (L ) 88.1 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 99.1 dB(A), uncertainty (K) 3 dB(A)
WA
8
(Original instructions)
FMC625 (H1)
18
0-400/0-1600
-1
51.4
13
13/38/13
905998** 906086**
typ. 1 typ. 1
V 230 230
AC
V 18 18
DC
A 1 2
90 - 240 45 - 120
min
FMC687L FMC688L
18 18
2.0 4.0
Li-Ion Li-Ion
Vibration total values (triax vector sum) according to EN 60745:
Impact drilling into concrete (a ) 13.1 m/s
h, ID
Drilling into metal (a ) < 2.5 m/s , uncertainty (K) 1.5 m/s
2
h, D
Screwdriving without impact (a ) < 2.5 m/s
h, s

EC declaration of conformity

%
MACHINERY DIRECTIVE
Cordless hammer drill - FMC625
Stanley Europe declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-1
These products also comply with Directive
2004/108/EC and 2011/65/EU. For more information, please
contact Stanley Europe at the following address or refer to the
back of the manual.
The undersigned is responsible for compilation of the technical
_
ile and makes this declaration on behalf of Stanley Europe.
Stanley Europe, Egide Walschaertsstraat14-18,
, uncertainty (K) 1.5 m/s
2 2
2
, uncertainty (K) 1.5 m/s
2 2
Kevin Hewitt
Vice-President Global Engineering
2800 Mechelen, Belgium
22/04/2014