Using The Self-Propel Drive; Mulching The Clippings; Stopping The Engine; Bagging The Clippings - Lawn-Boy Insight 10685 Operator's Manual

Using the Self-propel Drive

To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the mower will automatically keep pace
with you.

Stopping the Engine

To stop the engine, release the blade control bar.
Important: When you release the blade control bar,
both the engine and blade should stop within
3 seconds. If they do not stop properly, stop using
your mower immediately and contact an Authorized
Service Dealer.
8

Mulching the Clippings

Your mower comes from the factory ready to mulch
the grass and leaf clippings back into the lawn.
If the grass bag is on the mower, remove it (refer to
Removing the Grass Bag on page 9) before
mulching the clippings. If the side discharge chute is
on the mower, remove it and lock the side discharge
door (refer to Removing the Side Discharge Chute on
page 10) before mulching the clippings.
Important: Ensure that
the mulch plug (A) is
locked in place at both
the top and the bottom
before you mulch the
m-7954
clippings.

Bagging the Clippings

Use the grass bag when you want to collect grass
and leaf clippings from the lawn.
m-7968
If the side discharge chute is on the mower, remove it
and lock the side discharge door (refer to Removing
the Side Discharge Chute on page 10) before bagging
the clippings.
The blade is sharp; contacting the blade can
result in serious personal injury.
Stop the engine and wait for all moving parts to
stop before leaving the operating position.
m-7955
3352-942 Rev B
m-7967
Warning
A