Installation And Connection; Scope Of Supply; Installing And Connecting The Ap- Pliance; Drainage Connection - Siemens SR25ZI11ME User Manual

en Installation and connection
litres. In the automatic programmes
the temperature and run time are ad-
ditionally adjusted to the level of soil-
ing.

Installation and connection

Installation and connec-
tion
To ensure proper operation, connect
the appliance to the power and water
supply correctly. Observe the spe-
cified criteria and the installation in-
structions.

Scope of supply

After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
If you have any complaints, contact
the dealer who sold you the appli-
ance or our Customer Service.
Note: The appliance was tested at
the factory to check it is in working
order. It is possible that water has left
marks on the appliance. These
marks will disappear after the first
wash cycle.
The delivery consists of the following:
¡ Dishwasher
¡ Operating instructions
¡ Installation Instructions
¡ Warranty
¡ Installation material
¡ Mains cable
¡ Quick reference guide
Installing and connecting the ap-
pliance
You can position your built-under or
integrable appliance in a fitted kit-
chen between wooden and plastic
walls. If you subsequently install your
dishwasher as a free-standing appli-
ance, you must stop it from tipping
12
over, e.g. by screwing it to the wall or
installing it under a continuous work-
top that is securely connected to ad-
jacent cabinets.
Follow the safety instructions.
1.
→ Page 4
Follow the instructions for electrical
2.
connection. → Page 13
Check the Scope of supply and
3.
the condition of the appliance.
Consult the installation instructions
4.
for the installation dimensions re-
quired.
Make the appliance level using the
5.
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.
Install the drainage connection.
6.
→ Page 12
Install the drinking water connec-
7.
tion. → Page 13
Connect the appliance to the
8.
power supply.

Drainage connection

Connect your appliance to drainage
connection so dirty water is dis-
charged via the wash cycle.
Installing the drainage
connection
Consult the installation instructions
1.
supplied for the steps required
here.
Connect the wastewater hose to
2.
the outlet connection of the siphon
using the enclosed parts.
When doing so, check that the
3.
wastewater hose is not kinked,
crushed or twisted.
Also check that there is no cover
4.
in the drainage system preventing
the wastewater from being dis-
charged.