6 Product
information
Note
• Product information is subject to change without
prior notice.
General information
Power supply
Built-in Lithium battery
USB port
Dimensions (W x H x D)
Weight (main unit)
Amplifier
Output power
Frequency response
Signal to noise ratio
Speakers
Impedance
Maximum input power
Size
Bluetooth
Bluetooth version
Frequency range
Maximum transmition power 5dBm
Compatible Bluetooth profiles
Bluetooth range
5V 3A
7.4V, 4400mAh
5V 2A
299 x 98 x 100 mm
1.065 kg
10W x 2
100 Hz - 20 kHz
> 70 dB
4Ω
10 W
2.25"
5.0
2402 - 2480 MHz
A2DP, AVRCP
approx. 20m
7 Troubleshooting
Warning
• Never remove the casing of the speaker.
To keep the warranty valid, never try to repair
the speaker yourself.
If you encounter problems when using this
speaker, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips website (www.philips.
com/welcome). When you contac t Philips,
ensure that the speaker is nearby and the model
number and serial number are available.
General
No power
•
Make sure the speaker is fully charged.
•
Make sure the USB socket of the speaker is
properly connected.
•
As a power-saving feature, the speaker
turns off automatically 15 minutes after no
audio signal is received or no audio device
is connected.
No sound
•
Adjust the volume on this speaker.
•
Adjust the volume on the connected
device.
•
Make sure that your Bluetooth device is
within the operational range.
No response from the speaker
•
Restart the speaker.
EN
7