Honda CMX500/A 2018 Owner's Manual page 104

Tire Puncture
u
Installation
Attach the side collars to the wheel.
1.
On the left side, place the wheel between
2.
the fork legs and insert the front axle
shaft, through the left fork leg and wheel
hub.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
100
Removing Wheels
Align the end of the front axle shaft with
3.
the surface of the fork leg.
Tighten the left axle pinch bolts to hold
4.
the front axle shaft.
Install and tighten the front axle bolt.
5.
Torque: 38 lbf·ft (51 N·m, 5.2 kgf·m)
Loosen the left axle pinch bolts.
6.
Tighten the right axle pinch bolts.
7.
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m)
Surface of
fork leg
End of front
axle shaft