Advertisement
Table of Contents
Hollywood Racks
Model No. HR4200
Fits 1 ¼" & 2" hitches only - 2 bike capacity - Maximum weight 35 lbs/16kg per bike
•
For use on 1 ¼" & 2" hitches. Do not use hitch extenders.
•
Maximum weight 35lbs/16kg per bicycle. Do not use with Electric
bicycles, motorized bicycles, mopeds or motorcycles
•
This product is not intended for use on any trailer, fifth wheel or
vehicle being towed by another vehicle.
For video & installation instructions, please visit Hollywoodracks.com
Destination 2 Hitch Rack
1
Assembly and Instruction Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hollywood Racks Destination HR4200
Summary of Contents for Hollywood Racks Destination HR4200
- Page 1 Destination 2 Hitch Rack Hollywood Racks Assembly and Instruction Manual Model No. HR4200 Fits 1 ¼” & 2” hitches only - 2 bike capacity - Maximum weight 35 lbs/16kg per bike • For use on 1 ¼” & 2” hitches. Do not use hitch extenders.
- Page 2 Step 1: Assembly of bike rack Install knob into bracket per Fig. 2 Insert Clip L through hole in knob Place the wheel holder on top of the main frame per Fig. 4. Align the holes (There are four bolt/washer/nuts per wheel holder). Assemble washer C through bolt D, then insert the bolt/washer through the aligned holes of the...
- Page 3 Step 2: Installing rack into 1 1/4” or 2” trailer hitch hitch Fig. 7 Fig. 6 Fig. 8 Insert the bike rack’s hitch tube into the vehicle’s trailer hitch receiver. Align the holes of the hitch tube with the receiver. Place split washer K then the flat washer J onto hitch pin M per Fig.
- Page 4 Step 3: Setting up the rack Install the rack into your vehicle’s trailer Fig. 11 hitch per the above section. Rotate the mast to the vertical position per Fig. 10. Attach the slotted hinge to the bolt on the mast. Be sure the slot (Fig. 11) is firmly engaged on the bolt and tighten the knob securely.
- Page 5 3. Location of the pedals make the bike’s loading easier so there is little interference. We’ve supplied some tips, but all bikes have different geometry so look for what works best for your bikes. 4. You may have to raise or lower your seat posts for fitting the bikes on the rack.
- Page 6 Step 5: Attaching Safety Tie Down Straps Included with the Destination 2 rack is a red tie down strap (item O). Per Fig. 24, attach the straps to the bike frames and masts. Insert the end of the strap into the buckle and pull securely. Straps should have no slack after installation. Fig.
- Page 7 Fold Up Function Fig. 25 To fold the Destination 2 rack against the back of the car: Fold down the masts >> Fasten one of the wheel ratchet straps around the mast to prevent it from moving when the rack is folded against the Fig.
- Page 8 Hollywood Racks will remedy defects in materials and workmanship by repairing or replacing (at its option) a defective part without charge for labor or parts. Hollywood Racks may elect (at its option) to issue a refund equal to the purchase price paid for the product.
Need help?
Do you have a question about the Destination HR4200 and is the answer not in the manual?
Questions and answers