Polygroup TGA0M4865C00 Assembly Instructions

TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
Carefully follow the instructions below on how to quickly and easily set up your new tree.
Fig. A - Tree and Light Assembly
Quick Fold
Quick Fold Cinch
TM
Quick Fold TM Cinch
1
• Before you start to assemble your tree, choose an appropriate location near a wall outlet.
• Assemble the tree stand and place on a level surface. (See Fig. B)
Fig. A - Tree Stand Assembly
SET UP INSTRUCTIONS WITH QUICK FOLD
1
Section 2
Section 3
Section 1
Tree top
Tree stand
Each tree section is numbered
with a sticker. Please identify all
sections before assembling.
MODEL #: TGA0M4865C00 SKU: 090-759
Polygroup®!
4
TM Cinch
3
2
Eye Bolt
2
Section 1
Tree stand
Insert Section 1 into the tree stand.
*Electrical Rating For The Tree
(For Indoor Use Only)
2.21A 120VAC 60Hz
Do Not Tamper
Internal Parts
Quick Set®
Connections
Open the
protective
cover
Quick Set®
Connections
Quick Set®
Connections
Insert
Green Label
Plug Into Wall
Outlet
1.Unfold the legs and lay the stand in
a flat area. Then slide the locking
disc downward and snap into place.
2. When inserting the bottom section
of the tree into the assembled stand,
thread the eyebolt into the stand
and tighten until the pole is firmly
secured.
TM
3
A
Cinch
Handle
B
Cinch Clip
C
A. Locate "Pull Here" tab and corresponding
Cinch Handle
B. Hold Cinch Clip firmly with one hand and
press down on clip
C. With Cinch Clip depressed, pull clip away from
tree until all branches are released.
1
Do Not Tamper
Internal Parts
Open the
protective
cover
Do Not Tamper
Internal Parts
Open the
protective
cover