Specifications; Specification Table - Kubota Z231KW-AU Operator's Manual

SPECIFICATION TABLE

SPECIFICATIONS

SPECIFICATION TABLE
Model name
Max. engine power (gross)
Type
Number of cylinders
Bore and stroke
Total displacement
Engine
Rated revolution
Fuel
Starter
Lubrication
Cooling
Battery
Fuel tank
Engine crankcase (with filter)
Capacities
Transmission case including rear
axle gear case
Overall length
Overall width without mower deck
Overall height (with ROPS)
Dimensions Wheelbase
Min. ground clearance
Tread
Weight (without fuel, with mower deck)
Tires
Traveling speeds
Traveling system
Steering
Transmission
Parking brake
Min. turning radius
Drive system
PTO
Clutch type
Specifications and design subject to change without notice.
*1 Engine Max rpm
*2 These Kawasaki engines have been tested in accordance with SAE J1995, verified by TÜV Rheinland Group, and certified by SAE Interna-
tional. The gross power ratings of these engines were determined by using measurements according to SAE J1995 which were witnessed by
SAE-approved witnesses from TÜV Rheinland Group. Torque ratings of these engines were not certified by SAE. Actual power and torque
output will vary depending on numerous factors, including, but not limited to, the operating speed of the engine in application, environmental
conditions, maintenance, and other variables.
Z231KW-AU
Model
cm
L (U.S.gals.)
L (U.S.qts.)
L (U.S.qts.)
Front
Rear
Front
Rear
Forward mph (km/h)
Reverse mph (km/h)
kW(HP)
mm (in.)
3
(cu. in.)
rpm
U1 (12 V, RC: 45 min, CCA: 300, CA: 410)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
kg (lbs.)
mm (in.)
SPECIFICATIONS
Z231KW-AU
Kawasaki GH739V
*1*2
16.0 (21.5)
Air-cooled gasoline engine
2 (V-Twin)
78 × 76 (3.07 × 2.99)
726 (44.3)
3600
Unleaded gasoline
Electric
Full pressure lubrication
Air-cooled
13.6 (3.6)
2.1 (2.2)
1.513 to1.588 (1.599 to 1.678)
1890 (74.4)
1076 (42.4)
1660 (65.4)
1236 (48.7)
104 (4.1)
616 (24.3)
885 (34.8)
282 (621)
11 × 4 - 5 (4PR) smooth
18 × 7.5 - 10 (4PR)
6.5 (10.5)
4 (6.4)
2 - hand levers
2 - HST with gear
Hand lever applied, released
0 (0)
Belt
Electric
*3
17