Table of Contents
Advertisement
Installation
5. Fit the corner covers.
6. Open two screws of control panel cover.
7. Connect one display connector and two
vane control connectors of front panel to
indoor unit PCB.
The position marking on PCB is as:
Display connector : CN-DISPLAY
Vane control connector: CN-VANE 1,2
8. Close the cover for control box.
9. Fit the link on the panel as shown in
picture. (The link is included in the front
panel unit box.) (TM/TN/TP)
10. Attach the other side of link on the filter
guide of inlet grille. Install the air inlet
grille and filter on the panel. (TM/TN/TP)
11. Install the air inlet grille and Filter on the
panel.
20 Ceiling Cassette Air Conditioner
Screw
CN-VANE 1,2 CN-DISPLAY
Link
Link
Filter
guide
Advertisement
Table of Contents
