FERRI T380D Series Use And Maintenance Manual page 79

6.3.1 Rotational direction of the rotor
Prepare the machine for the work to carry out and the type of material to cut, adjusting:
► The height of cut (see Chapter 5);
► The rotational direction of the rotor:
A) Cutting grass
B) cutting bushes, thorns and branches.
Lever 1 controls the rotation direction of the rotor, after shifting lever 2 which must be activated to allow lever 1 to
carry out the command.
1
0
2
A
Lever 2 prevents the accidental reversal of rotation direction with the use of only one lever.
WARNING
Before reversing rotation, wait for the rotor to stop (about 30 seconds) in order to avoid
breakage of the hydraulic motor.
WARNING
Rev. 1.0
1 0
2
T380D-T430D
USE AND OPERATION
0
1
2
B
1
0
2
6.9
79