Assembling The End Tool - FERRI T380D Series Use And Maintenance Manual

4.6

Assembling the end tool

Maintenance and other operations on the hydraulic systems must be performed only by
specifically instructed personnel.
WARNING
The end tool is normally supplied already fitted to the arm.
It may happen that, for packing reasons or because it is interchangeable with other features, the end tool has to be
assembled afterwards.
Rev. 1.0
Ensure that the hydraulic pipes are correctly fitted, respecting the colour
recognition code and remembering that inverting them causes opposite
movements to those ordered with the controls.
T380D-T430D
TRANSPORT AND INSTALLATION
59