Davis Instruments Perception II Getting Started Manual page 3

Welcome to Weathe rLink!
Welcome to Davis Instruments' WeatherLink for Windows. WeatherLink's data
logger and software connects a personal computer to your Davis weather station,
allowing you to store, view, plot, analyze, export, and print your weather data.
The following Davis Instruments' weather stations are supported: Vantage Pro
Vantage Pro Plus, Weather Monitor II
Co n t en ts of P ack ag e
Before continuing, please make sure your WeatherLink package contains the fol-
lowing listed items:
WeatherLink for Vantage Pro (#6510C)
Data Logger for Vantage Pro
8' (2.4 m) cable with connector to link your station to your computer.
9-pin (DB-9) PC COM Port Adapter (blue)
Use the 9-pin adapter to connect the data logger to a 9-pin serial port.
Note: If you need a 25-pin adapter, contact Davis Instruments Technical Support at 510-
732-7814.
Loopback connector
The loopback connector is a short piece of cable with a phone plug at one end
and a red plastic cap at the other.
WeatherLink Software CD ROM
WeatherLink for Monitor, Wizard and Perception (#7862)
Data Logger for Monitor, Wizard and Perception
9-pin (DB-9) PC COM Port Adapter (black)
Use the 9-pin adapter to connect the data logger to a 9-pin serial port.
Note: If you need a 25-pin adapter, contact Davis Instruments Technical Support at 510-
732-7814.
Loopback connector
The loopback connector is a short piece of cable with a phone plug at one end
and a red plastic cap at the other.
WeatherLink Software CD ROM
W
E L C O M E T O
®
, Weather Wizard III
W L
E A T H E R
®
, and Perception II
!
I N K
®
,
®
.
1