Davis Instruments Long-Range Repeater Installation Manual page 3

Welcome!
™
The Vantage Pro2 Long Range Repeater can be used with any Vantage Pro2 wireless
transmitter station and re-transmits the information to a Vantage Pro2 compatible receiver
(Vantage Pro2 console or Envoy
Range Repeater works in much the same way as the Vantage Pro2 wireless repeater, but
extends the distance between a repeater and a receiver by up to 10 times that of the Van-
tage Pro2 wireless repeater (#7626 and 7627).
Long Repeater Addendum Overview
This addendum provides additions information specific to the installation and use of the
Long Range Repeaters and is intended to be used in conjunction with the Wireless
Repeater Installation Manual. The table below shows the location of the information
required to install and maintain your Long Range Repeaters:
Section/Procedure
Components and Hardware
Repeater Board Contents
Additional Antenna Components and Hardware
Tools for Setup
Additional Tools for Setup
Wireless Repeater Introduction
Repeater Configurations/Architecture
Long Range Repeater Antenna Configuration
Applying Power
Single Repeater Installation
Advanced Repeater Installation
Mounting Long Range Wireless Repeater and Antennas
Connecting External Antennas to the Repeater
Console and WeatherLink Configuration
Repeater Communication Troubleshooting
Long Range Repeater Specification
®
or another Vantage Pro2 Wireless Repeater). The Long
In This
Addendum
X
X
X
X
X
X
X
In the Wireless
Repeater Manual
X
X
X
X
X
X
X
X
X
X
1