Sharp AQUOS 4T-C50AH1X Operation Manual page 35

<< On-Screen Display Menu
Example
ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA
Initial setup (Continue)
Input settings
LINK setup
Link operation
Using the HDMI CEC (Consumer Electronics
Control) protocol, with Link operation you can
interactively operate compatible system
equipment (e.g. DVD), by connecting the link
operation-compatible devices with HDMI-
certified cables to the TV. Link operation allows
you to operate the HDMI-connected equipment
and the TV by using a single remote control
unit. (Off, On)
Auto power on
If this is activated, the one touch play function
is enabled. While the TV is in standby mode, it
automatically turns on and plays back the
image from the HDMI source. (Off, On)
EN 4-14
Speaker select
You can select to listen to the TV sound only
from the LINK-compatible audio system.
(Internal speakers, External device)
Audio return channel
If this function is set to "Auto", the TV can send
audio data for video content shown on the TV
to a connected audio device with just one ARC-
compatible cable. Using this function eliminates
the need to use a separate digital or analogue
audio cable. (Off, Auto)
Connection for using "Audio return
channel"
You need to use ARC-compatible
cables/devices and connect to the HDMI 1
terminal to activate this function.
NOTE
The ARC (Audio return channel) function
works only when using the HDMI 1 terminal.
When you use an audio system compatible
with the ARC function of the TV, you do not
need to connect an optical audio cable to
the TV.
>>