Advertisement
Note: The period of time between troweling operation is
calculated from how quickly the concrete sets.
To move the product in different
directions
•
To turn to the left, lift the handle.
•
To turn to the right, push the handle down.
•
To move the product forward, push the handle
forward.
1124 - 001 - 06.04.2020
•
To move the product rearward, pull the handle
rearward.
To adjust the blade angle
The blade angle is adjusted gradually.
1. To increase the blade angle, turn the blade
adjustment knob clockwise.
2. To decrease the blade angle, turn the blade
adjustment knob counterclockwise.
To stop the product
1. Release the quick stop handle (A). The motor stops.
2. Disconnect the power cord from the power source.
WARNING: Always disconnect the
power cord from the power source when
the product is not in operation.
A
9
Advertisement
