Tweaker - Gigabyte H410M H User Manual

2-4

Tweaker

Whether the system will work stably with the overclock/overvoltage settings you made is dependent
on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage
to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced
users only and we recommend you not to alter the default settings to prevent system instability or
other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If
this occurs, clear the CMOS values and reset the board to default values.)
& CPU Clock Ratio
Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU
being installed.
& Ring Ratio
Allows you to set the CPU Uncore ratio. The adjustable range is dependent on the CPU being used. (Default:
Auto)
& IGP Ratio
(Note)
Allows you to set the Graphics Ratio. (Default: Auto)
& AVX Offset
(Note)
AVX offset is the negative offset of AVX ratio.
ƒ Advanced CPU Settings
& CPU Over Temperature Protection
Allows you to fine-tune the TJ Max offset value. (Default: Auto)
& FCLK Frequency for Early Power On
Allows you to set the FCLK frequency. Options are: Normal(800Mhz), 1GHz, 400MHz. (Default: 1GHz)
& Hyper-Threading Technology
Allows you to determine whether to enable multi-threading technology when using an Intel
supports this function. This feature only works for operating systems that support multi-processor mode.
Auto lets the BIOS automatically configure this setting. (Default: Auto)
& No. of CPU Cores Enabled
Allows you to select the number of CPU cores to enable in an Intel
cores may vary by CPU). Auto lets the BIOS automatically configure this setting. (Default: Auto)
(Note) This item is present only when you install a CPU that supports this feature. For more information about
Intel CPUs' unique features, please visit Intel's website.
®
(Note)
multi-core CPU (the number of CPU
®
- 22 -
CPU that
®