Table of Contents
Advertisement
Problem solving guide
Fault messages at the end of a programme
Problem
Check detergent
Hygiene info: Run a
programme at min.
75°C or "Clean
machine'"
programme
Check hot water
intake
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the OK sensor.
70
Possible cause and remedy
Excessive foam has built up during washing.
With TwinDos, check the dosage amount set.
Reduce the amount set in 10% increments.
Use less detergent next time and follow the
manufacturer's instructions on dosage given on
the packaging.
When washing, a wash programme using a
temperature above 60°C has not been run for a long
time.
Turn the programme selector to Further
programmes/.
Touch the sensors until
in the display.
Touch the OK sensor.
The following appears in the display:
Touch the OK sensor.
Run the
Clean machine
IntenseClean machine cleaner or a universal
powder detergent.
This will clean the washing machine and prevent a
build-up of bacteria and odours.
The water inlet for hot water is blocked or turned off.
The programme was carried out using cold water.
Check whether the tap is turned on properly.
Check whether the inlet hose is kinked.
Check whether there is sufficient water pressure.
Maintenance
Clean machine
programme using the Miele
appears
Hide quick links:
Advertisement
Table of Contents
