Advertisement
CARE, CLEANING, AND REPAIR
OF CORTERRA SOLID SURFACE
Acorn's Corterra densified solid surface material is
composed of recycled Solid Surface Polymer Resin,
Aluminum Trihydrate and Fillers. It is resistant to stains,
impact and burns and complies with ANSI Z124.3. It is
attractive, durable and easy to maintain.
Routine Cleaning
Corterra should be kept clean at all times. If maintained,
Corterra surfaces will retain their new, clean appearance
indefinitely. Wash with a non-abrasive all purpose cleaner
and water, then rinse. Wipe dry. (Never use cleaners with
strong chemicals such as toilet bowl cleaners, rust
removers, ceramic cook top cleaners, laquer thinners or
oven cleaners). To remove persistent stains use a Scotch
Brite pad and an abrasive cleaner or a solution of
household bleach and water (1 part water to 1 part
bleach).
Repairing Surface Damage
Surface damage, such as minor chips, scratches, burn
marks and graffiti can be repaired with a fine grit abrasive
cleanser, such as a Scotch-Brite pad or fine grit
sandpaper. For more serious physical damage caused by
vandals, an Acorn Solid Surface Repair Kit is available.
Contact the factory for details. Refer to drawing #9927-
160-002.
WHITEHALL MANUFACTURING • P .O. BOX 3527 • City of Industry, CA 91744-0527 U.S.A
Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: www.whitehallmfg.com
Instructions for Operation and Care of Best-Care WH3776
CARE AND CLEANING OF ENVIRO GLAZE/
POWDER COATING
Recommended Cleaning Materials:
Sponge - natural or artificial
l
Nylon or other soft-bristle brush
l
Microfiber Cloth
l
Recommended Cleaning Solutions:
Hand dishwashing liquid / soft water solution
l
Mild soap / soft water solution
l
Soft-Scrub ®
l
Comet Soft Cleanser ®
l
Clorox ®
l
Scrubbing Bubbles ® Gel
l
Normal Cleaning:
For everyday cleaning, use a sponge or cotton cloth soaked
in mild soap and wipe-down surface. In industrial or marine
locations, close attention should be paid to regular care due
to harsher atmosphere.
To remove dirt and debris:
Fixture should be periodically washed with a diluted solution
of a mild non-abrasive detergent (e.g. Dawn ®) in cold or
ambient temperature water using a soft non-abrasive cloth
or chamois.
15
- Quick Links:
- Rough-Ins
- Installation
Hide quick links:
Advertisement
