Using The Appliance - Farberware FBW FT 43721 B Manual

USING THE APPLIANCE

NOTE:
- YOUR APPLIANCE
IS EQUIPPED WITH
A SAFETY SWITCH
LOCATED ON THE
CONTROL PANEL
ASSEMBLY. IF THE
CONTROL PANEL
ASSEMBLY IS NOT
PLACED PROPERLY
IN ITS POSITION, THE
APPLIANCE WILL NOT
OPERATE.
- Incorrect assembly may lead to an unstable setup and might cause injuries.
- The Silicon Rubber Sealing Plate prevents hot steam escaping from under the
lid. Do not attempt to remove.
This appliance can be used for frying food such as French fries, chicken or fish
pieces ( Recommended frying times and temperatures).
NOTE:
- The appliance has a rated power of 1700W. Before plugging it into the wall
outlet, ensure that the electrical circuit is not overloaded with other appliances.
This appliance should always be operated on a separate 120V ~ 60Hz wall
outlet.
- Make sure the appliance is switched off before connecting it to a wall outlet.
• Place the appliance on a clean, flat and
heat-resistant surface. When using the
appliance on wooden surfaces, use a
heat resistant mat to protect the wood
from damages. Ensure a minimum
distance around the appliance of
at least 4 inches to other objects,
cupboards and walls.
• Ensure the Oil Container is assembled,
empty and in place inside the
appliance, the Oil Filtration Control
Knob is on the LOCK ( ) position and
the oil Filter Cover is in place inside
the Oil Reservoir. Then, pour suitable
cooking oil into the Oil Reservoir (ill.
f ).
Silicon Rubber
Sealing Plate
8 8
Safety Switch
f