Troubleshooting - Farberware FBW FT 43721 B Manual

TROUBLESHOOTING

Problem
The appliance is not
working
Oil is spilling over the
rim
The appliance is
working but the
POWER indicator does
not light up
After the filtration dial
is turned to the correct
position, the Fryer is
not filtering the oil, or
filtration is very slow, or
filtration stops while a
lot of oil remains in the
reservoir
Cause
Magnetic Plug not properly
fitted
Control Panel Assembly not
installed correctly
Appliance not plugged in
Wall outlet not energized
Malfunctioning appliance
Overheated oil or appliance Unplug the appliance from
Overfilled Oil Reservoir
Overfilled basket
Damaged POWER indicator Unplug the appliance from
The Oil Reservoir is not
properly seated in the
housing
19
Solution
Connect the Magnetic
Plug to the electrical outlet
before connecting the plug
to the wall outlet
Install the Control Panel
Assembly correctly
Insert the plug into the wall
outlet
Check fuses and circuit
breaker
Unplug the appliance from
the wall outlet and contact
qualified personnel to check
and repair the appliance
the wall outlet and allow the
appliance / oil to cool down.
Then press the Reset Button.
Unplug the appliance from
the wall outlet and allow the
appliance / oil to cool down.
Then, remove excess of oil
Lift out the basket by its
handle and hang it onto the
Basket Hook into the notch.
Remove excess of food with
suitable utensils
the wall outlet and contact
qualified personnel to check
and repair the appliance
Once oil is cool enough,
press firmly on the front of
the oil pan, to adjust the
position of the reservoir and
open the valve