EcoMotion Mini Pro User Manual page 24

Problem
Motor runs without using TAG /
PAS systems
TAG system doesn't work
Motor make a "drilling" noise and
reduce power / shuts off
Charger doesn't charge the battery
Charger shows s full charge in an
unusually short amount of time
Charger indicator light flashes and
not change into red (not charging)
Bicycle has intermittent power
Error symbols specified on page 17
•
Possible cause
Faulty PAS sensor
Faulty throttle
Wire short
Faulty controller
Motor shutdown system operated
Faulty throttle
Faulty controller
Throttle button not pressed in
Display rupture wire
Low battery
Motor gear damaged
Burnt fuse
Faulty charger
Outlet has no power
Faulty charger
Battery lifetime is over / shortened
Faulty charger
Loose connector
Loose fuse
Damaged wires
Solution
Replace sensor and retest
Replace throttle and retest
Replace main cord and
throttle cord and retest
Replace controller and retest
Make sure that bake handles
in their place
Replace the throttle and
retest
Replace controller and retest
press in the shutdown button
Replace the display and test
Charge the battery full charge
Replace motor gears
Replace the fuse
Replace the charger
Check a different outlet
Replace the charger
Replace the battery
Replace the charger
Check all connectors
Check fuse connector
Inspect all wires
24