Malfunctions & Solutions - EcoMotion Mini Pro User Manual

Problem Possible cause
Low tire air pressure
Brake pads rubbing against their discs
PAS magnets away from sensor
Speed / range
reduce
Low battery
Battery lifetime is over / shortened
Ridding conditions (headwind, climbing, etc.) Reduce range to be expected
Burnt fuse
Loos connector
Rupture wire
No power
Faulty switch
(display
doesn't work)
Faulty controller
Battery lifetime is over / battery not charged. Replace / charge the battery and retest
Faulty display
Motor shutdown system operated
PAS magnets away from sensor
PAS system
doesn't work
Faulty PAS sensor
Faulty controller
Display rupture wire
Solution
Inflate tiers to recommended pressure
Adjust brakes and / or caliper
Attached the magnets to the sensor
Charge the battery full charge
Replace the battery
Replace the fuse
Check all connectors
Inspect all wires for damage
Replace switch and retest
Replace controller and retest
Replace the display and retest
Make sure that bake handles in their
place
Attached the magnets to the sensor
and retest
Replace the sensor and retest
Replace controller and retest
Replace the display and retest
23