Advertisement
Quick Links
The G4-20G-010-192T is best suited for Multi-10 Gb data centers.
G4-20G-010-192T technical specifications
System
Deployment
Base storage
Max storage
Lights Out Management (LOM)
Redundant OS drive
OS drive hot swappable
OS drive size
RAID drive hot swappable
RAID version
Rail kit
Operating system
Physical
Height
Width
Depth
Weight (with mounted rail kit or portable
unit without a travel case)
Weight (handling or portable unit in a
travel case)
Media
Monitoring interfaces
Speed
Accepted transceivers
Performance
Aggregate performance
g420g010192t - 1
G4-20G-010-192T
-
Multi-10 Gb data center
192 TB
192 TB
Yes
Yes
Yes
1 TB
Yes
6
Yes
Windows 2012 R2
-
4U
19 in
26.5 in
116 lbs
121 lbs
-
8
1/10 Gb
SFP/SFP+
1
-
20 Gbps
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Viavi G4-20G-010-192T
Summary of Contents for Viavi G4-20G-010-192T
- Page 1 G4-20G-010-192T The G4-20G-010-192T is best suited for Multi-10 Gb data centers. G4-20G-010-192T technical specifications System Deployment Multi-10 Gb data center Base storage 192 TB Max storage 192 TB Lights Out Management (LOM) Redundant OS drive OS drive hot swappable OS drive size...
-
Page 2: Parts List
QSFP28 tranceivers may be SR4, LR4, or BIDI. Parts list Each appliance comes packed in a box or several boxes. The boxes contain the various components necessary for a successful installation. The G4-20G-010-192T appliance box contains the following components: 1 Head unit with RAID drives preinstalled ●... - Page 3 1. Mount the appliance in your cabinet. Refer to the instructions on VIAVI Rail Kit (page 10). Use a server lift if necessary. Do not remove the drives from the chassis. 2. Connect the cables.
- Page 4 12. Double-click the Observer icon on the Desktop to start Observer. Your hardware appliance is installed and on your network. SFP, SFP+, QSFP+, and QSFP28 transceivers are sold separately. 1. 4 | © 2020 Viavi Solutions (3 Feb 2020) — viavidoc.com/observerstart...
- Page 5 Next, give the ETH0 IP address and IPMI port address, if using, to the Observer administrator. They need the addresses to add this GigaStor probe to Observer to capture network traffic with a probe instance. G4-20G-010-192T installation | 5...
-
Page 6: Configuring Your System
Configuring your system There are a number of items to do to get your system on your network and ready to use. Startup and shutdown There are several procedures to turn on or off your system. First plug in the power cord 1. - Page 7 components by keeping the dust plugs installed until you are ready to install the cables. Your transceivers can be inserted into any open port and in any order. ♦ You can hot-swap the connected transceivers at any time, but it is ♦...
- Page 8 Configuring the LOM or IPMI port Your appliance comes with an on-board LOM or IPMI port that provides you a dedicated management channel for device maintenance. It allows you to monitor, start, stop, and manage your appliance remotely regardless of whether the appliance is powered on.
- Page 9 To receive email alerts, change the settings at Configuration > SMTP. ● To receive SNMP traps, change the settings at Configuration > SNMP. ● To receive Syslog messages, change the settings at Configuration > ● Syslog. You configured the IPMI port and changed the default password. You may have also configured your system to send alerts when certain situations arise.
- Page 10 3. Slide the rail toward the front of the chassis to hook the inner rail onto the side of the chassis. 4. (Optional) If desired, secure the rail with two flat head M4 x 4mm screws (and washers) as illustrated. 5. Repeat for the other inner rail. 10 | © 2020 Viavi Solutions (3 Feb 2020) — viavidoc.com/observerstart...
- Page 11 Figure 9: Installing the inner rails 6. Identify the outer rack rails. 7. Press upward on the locking tab at the rear end of the middle rail. 8. Push the middle rail back into the outer rail. 9. Hang the hooks on the front of the outer rail onto the square holes on the front of the rack. If desired, use screws (and washers) to secure the outer rails to the rack.
-
Page 12: Technical Support
(North/South America) uknisupport@viavisolutions.com (EMEA/APAC) Support hours are 7:00 A.M. to 7:00 P.M. CST/CDT (for North and South America) and 8:00 A.M. to 5:00 P.M GMT (EMEA and APAC). 12 | © 2020 Viavi Solutions (3 Feb 2020) — viavidoc.com/observerstart...
Need help?
Do you have a question about the G4-20G-010-192T and is the answer not in the manual?
Questions and answers