Phone Operation Screen
Name and phone number
• If it is registered with a Group, the Group Name is also displayed.
Although, depending on the connected mobile phone, it may not
be displayed.
Conversation time
Adjusting the Speech Volume
You can adjust Caller Level and Microphone Level.
Touch [ ] or [ ] of "Speaker Volume (
(
)".
You can adjust the volume in 11 levels.
Changing the Voice Output
The voice output for calls is switchable between car speakers and the
mobile phone speaker.
Touch [ ] or [
].
• Depending on the mobile phone, this operation may not be possible.
Muting the Microphone
Touch [ ].
• To cancel MUTE mode, touch [
DTMF (Touch-Tone) Function
Transmits a DTMF (Touch-Tone) during a call.
1
Touch [Keypad].
The number input screen (Keypad) appears.
2
Input number.
• You can transmit a Touch-Tone signal during a call.
36
-EN
)" or "Mic Level
].
Phone Book Function
Phone Book screen example
Searching in the Phone Book
You can make a call using the phone book search function.
1
Touch [Search] on the Phone Book screen.
The Input User Name screen (Keypad) is displayed.
2
Input the string of letters of the name that you want to
search, then touch [OK].
A list of names beginning with the string of letters you entered is
displayed.
3
Touch [
] of the name or number of the contact which
you want to call.
The phone call is started.
• If there are fewer than five registered items in the phone book, you
cannot use the phone book search function.
Synchronizing the Phone Book
You can synchronize the system's phone book with the mobile phone's
phone book.
1
Touch [SYNC] on the Phone Book screen.
The confirmation screen is displayed.
2
Touch [Yes].
Synchronization of the phone books starts.
• You can store up to 1,000 registered name in the phone book.
• You can store up to 5 phone numbers by one person's name.