Table of Contents
Advertisement
Charging the batteries
Switch
OFF
the receiver headphone.
To recharge the headphone batteries, place the headphones on the transmitter,
taking care to ensure that the charge contacts touch the transmitter's charge pins
and the green charging indicator is ON.
The charge process starts automatically and the green indicator light comes ON.
Be sure to charge new batteries for 24 hours before using them for the first time
in the headphones. The green indicator light will be on continuously during
battery charging.
Troubleshooting
Many times, problems have simple causes. We would like to give you some tips to
solve some common problems. Should these tips not help, please call us!
The
No battery charge: Make sure that the battery
headphones
touching the charging contact has the coating
has no
removed.
function
Ensure that the AC/DC adaptor is pushed fully into the power
outlet and that its cable is properly connected to the DC IN 6V
connector on the transmitter.
The
Adjust the volume to a suitable level.
headphones
Use the headphones volume control to increase the sound
output level
level.
is set too
The headphones battery charge level may be too low. Recharge
low.
the batteries or replace them with fully charged batteries.
No sound.
Ensure that your TV set, Hi-Fi system or audio component is
switched on and set to a channel that broadcasts an audio
signal or is in playback mode.
The
The headphones may be too far away from the transmitter.
reception is
Move closer to it.
bad or
The audio signal input level is too low. Increase the volume
distorted.
from the audio source of Hi-Fi, CD, or TV, etc.
If distortion appears, press the "Auto Scan" button again. Use
the channel selector to change the transmitter's transmission
frequency. Then you will need to adjust the tuning control by
press the "Auto Scan" button on the headphones.
Helpline No. UK/ North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: 82937
7
9
Advertisement
Table of Contents
